Tag Archives: united kingdom

Om Ah Hung Slate Monoliths

These monoliths were cut, carved, enamelled and polished from 2.5 cm thick slabs of reclaimed building cladding. From start to finish, this was a project of intense concentration and precise measurements until their final installation in a garden in Devon.

The above image shows the three syllables chiselled out and in the process of adding relief ‘detailing’ with my Foredom.

The above image shows the Hung syllable after carving the ‘detailing’.

The Hung syllable after polishing and adding three coats of signwriters/monument enamel.

After carefully transporting the three stones over a journey of 400 miles, my wife and I spent around 10 hours digging the trench (in appalling ground conditions!) for the installation. Firstly, the plinths were assembled- these were pre-cut slate slabs and monoblocks adhered using CT-1 construction adhesive;

Once in place and all levels were correct, the trench was filled with concrete;

The ground was returned to the original state, wrappings removed and the stones unveiled;

 

 

 

 

 

Advertisements

A Stable Sign for Hugo

A stable sign for Hugo the horse (30 x 25 cm). Hand carved from a reclaimed roof slate.

Design © Hatch, Burn, Carve.

 

‘Luna 2’ Moon Gazing Hound Stone

Another ‘Luna’ hound stone (47×30 cm). Hand carved and enamelled from a natural Cornish beach stone. Design © Hatch, Burn, Carve.

 

Om Ah Hung Stones

Hand carved in the Scottish Borders from natural Cornish beach stones.

On sale at Kagyu Samye Dzong, London and also available to order direct from Hatch, Burn, Carve.

 

Pictish Stag Slate Plaque

Pictish stag slate wall plaque, freehand carved and enamelled (15 x 16 cm). Based on the carving from a Class I Pictish stone from Grantown on Spey (now housed in the National Museum of Scotland, Edinburgh).

This one is now sold (and with a customer from Grantown on Spey!), but I will be making more and they are available to order.

 

Tibetan Buddhist House Sign

Tibetan Buddhist house sign (24 x 14 cm). Hand cut, drilled and carved from 1 cm thick slate, and hand painted with gold enamel. Tam syllable design used with kind permission from Tashi Mannox.

 

 

 

Tibetan Skull Plaques

I based these skulls on a photograph of an ancient (and very worn) Tibetan Buddhist stone.

These are all freehand carved before sanding/polishing to 1200 grade. Enamelled with professional signwriters enamel before finishing with slate sheen. Sizes range from 7 x 10 cm to 9 x 10.5 cm. Available to buy now.

 

St Margaret’s Chapel Guild Presentation Plaque

A very special roof slate.
It was an honour to be asked to carve this presentation plaque for St Margaret’s Chapel Guild.

dsc00268d

St Margaret’s Chapel is the oldest building in Edinburgh (within Edinburgh Castle) dating back to the 12th Century. This slate was from the re-roofing in the mid-1800’s. Coat of arms measures 20 cm high and lettering on the scroll was 3 mm.

dsc00283

dsc00286

 

Cornish and East Lothian Candle Holders

Three new driftwood candle holders.
Hand crafted from wood I collected from Tyninghame Beach in East Lothian and Crackington Haven in North Cornwall.

dsc00334-2

After I collect the driftwood, it is placed in my outside wood store for around a year, then stored indoors for approximately three months.

dsc00333-2

The process of making starts with removing any bark with my bushcraft knife, then coring holes for the candles. This is followed by an initial sanding with two grades of paper using an electric sander, then the long slow process of hand sanding with another four or five grades of paper before two coats of wax and polishing.

dsc00336-2

dsc00338-2

dsc00264-2