Om Ah Hung Slate Monoliths

These monoliths were cut, carved, enamelled and polished from 2.5 cm thick slabs of reclaimed building cladding. From start to finish, this was a project of intense concentration and precise measurements until their final installation in a garden in Devon.

The above image shows the three syllables chiselled out and in the process of adding relief ‘detailing’ with my Foredom.

The above image shows the Hung syllable after carving the ‘detailing’.

The Hung syllable after polishing and adding three coats of signwriters/monument enamel.

After carefully transporting the three stones over a journey of 400 miles, my wife and I spent around 10 hours digging the trench (in appalling ground conditions!) for the installation. Firstly, the plinths were assembled- these were pre-cut slate slabs and monoblocks adhered using CT-1 construction adhesive;

Once in place and all levels were correct, the trench was filled with concrete;

The ground was returned to the original state, wrappings removed and the stones unveiled;

 

 

 

 

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s